Electrolux 241737900, Инструкция по использованию и уходу

Страница: 5 / 36

5
Installation
Door Opening
Your refrigerator should be positioned to allow easy access to a counter when
removing food. For best use of drawers and freezer baskets, the refrigerator
should be in a position where both the refrigerator and freezer doors can be fully
opened.
Removing And Replacing The Toe Grille
To remove the toe grille:
1 Open freezer and refrigerator compartment doors.
2 Remove the screw from each side of the toe grille.
3 Pull the toe grille forward and lift it off.
Reverse these instructions to install the toe grille.
Leveling
All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator
is equipped with adjustable front rollers to help level your unit. To ensure proper
door seal and assist door closing, the refrigerator should be tilted 6 mm (1/4 inch),
front to back.
To level your refrigerator:
1 Remove toe grille (see above) to access the front
rollers.
2 Adjust the rollers by turning each roller adjustment
bolt with a wrench until the refrigerator is level and
stable.
3 Check both doors to be sure seals touch cabinet on all
four sides.
4 Replace the toe grille.
Tips:
• If the freezer door is higher than the refrigerator door, raise the right corner
and/or lower the left corner until the doors align across the top of the cabinet.
• If the refrigerator door is higher than the freezer door, raise the left corner
and/or lower the right corner until doors align across the top of the cabinet.
NO NO NO NO NOTE TE TE TE TE
If your refrigerator is placed with the door hinge side against a wall, you may have to allow
additional space so the door can be opened wider.