Electrolux Professional Compass Pro WH6-11, Руководство пользователя

Страница: 24 / 28

24
User manual
Note!
Contact qualified service personnel to perform maintenance on the internal drain and hoses once a year.
7.6 Water inlet
At regular basis, check the filter at the water inlet. Clean if necessary.
Demount the hose to the water inlet and pull out the filter (A).
When remounting, make sure the filter is in position and that the connections are tight.
A
fig.7706
7.7 Cleaning the mop elements
(Only valid for mop machines).
At regular basis, check the mop elements and clean if necessary.
In the inner drum, there is one or two core covers to the heating elements depending on the size of the machine. The
front cover is located directly above the drain and the other is in front of the element retainer. Two small screwdrivers
are required to remove the core cover.
Use a screwdriver to press down on the retaining plate in the round hole on the core cover.
Place the other screwdriver in the oval hole on the core cover and through the round hole in the retaining plate.
Push the retaining plate towards the screwdriver which is pressing down on the retaining plate.
fig.6989A
Remove the core element/elements and clean the elements. If the elements are very dirty, it may be wise to remove
the elements from the drum when cleaning them
The core covers are refitted in reverse order, with the difference that it is not necessary to press on the retaining
plate; you only need to push the retaining plate back into place. When you hear a clicking sound, the retaining plate
is in position.
7.8 Maintenance to be carried out by qualified service personnel
Contact qualified service personnel to perform the following maintenance:
Once a year:
• Inspect the interior of the machine during an actual wash cycle to ensure that no leaks are noticed.
• Clean the internal drain and hoses.