- 12 -
OPERATION
Replacing the stylus:
IMPORTANT: Avoid touching the stylus itself.
1. Lift the tone arm off the tone arm rest.
2. At the front end of the tone arm, place the tip of your fingernail between the red stylus holder and
the black cartridge housing as shown, press down on the red stylus holder until it separates from the
cartridge housing.
3. Completely remove the red stylus holder with worn stylus and discard it.
4. Place the new red stylus holder with stylus under the cartridge housing. First, press upward on the back
side of the stylus holder, and then press up on the front edge of the stylus holder until it snaps into place
on the cartridge housing.
IMPORTANT!
To protect the turntable from damage during transportation, a silver transit screw is located at
the upper right of the turntable platform.
1. Before playing, please use a screwdriver to turn the transit screw in
clockwise direction (screw going down) completely to unlock
the turntable.
2. To lock the turntable again for transportation, please turn screw in
counter-clockwise direction.
CARE AND MAINTENANCE
Содержание WELLINGTON
Страница 16: ... 16 NOTES ...
Страница 17: ... 17 NOTES 16 ...