Electrohome DVD player, Руководство пользователя

Страница: 23 / 25

The power cord may not be connected
to the wall outlet.
TV may not be set up with the correct
settings.
The video cables my not be connected
or secured properly.
The audio cables my not be connected
properly.
An external audio system connected
may not be turned on.
The audio output settings may not be
correct.
The disc may be dirty.
During fastforward or rewind modes.
Possible interference with other
connected devices.
Unsteady picture
or picture with
noise interface
Disc may not be loaded
.
The disc type is not correct
.
Disc not inserted properly into the guide
slot.
The disc may be dirty
.
TV screen is displaying the setup menu
.
Power waves or other abnormal
phenomenon (such as static) may
disturb the normal conditions of the
remote control
.
Try turning the player Off/On or Unplugging/
Plugging in the player.
Remote control may not be pointed
directly at the remote sensor.
The remote control is too far from the
player.
The batteries may be depleted.
Insure the power cord is completely plugged into
the outlet.
Refer to this manual on adjusting the proper
settings.
Insure all cable connections are in the proper
places and plugged in.
Insure all cable connections are in the proper
places and plugged in.
Insure any external devices attached to this
player are set up and turned on.
Refer to this manual on adjusting the proper
settings.
Contact disc manufacturer for cleaning
instructions or try another disc.
Sometimes a tiny distortion appears. This is a
normal condition.
Connect the player directly to the TV.
Insure the disc is in the player.
Load a compatible disc.
Insure the disc is inserted with the label side up.
Insure the disc is inserted correctly.
Contact disc manufacturer for cleaning
instructions or try another disc.
Press SETUP button to turn off the menu.
Insure the remote control is pointed directly at
the sensor.
Operate the remote control within 7 meters
(23 ft) of the player.
Replace the batteries with fresh ones.
22