ELECTRODRIVE Tug Tough 10T, Руководство по эксплуатации

Страница: 15 / 28

Tug Tough 10T—Operating Manual
15
Appendix 2: Charging procedures for
SLA batteries
§
Always charge batteries when work is complete and the equipment is not required for
use.
§ Opportunity charging is NOT recommended. This can also shorten battery life.
§ Never leave batteries in a discharged state as this will shorten the batteries life.
§ For maximum battery life, a battery must be recharged to 100% capacity. Recharging
less than 100% may result in premature battery failure. Batteries are not covered
under warranty if they are not recharged properly.
§
If batteries are disconnected from the machine and not used for lengthy periods of
time, it is recommended to give them a maintenance charge once every two months.
Charging setup
§
Ensure you have the correct charger for the batteries. The correct voltage and current
is important to ensure the full life of the batteries.
§
Check all connections are tight and in good condition.
§
The green charger LED will illuminate to confirm charging is in progress.
§
If charger lights do not come on, call your service technician.
§
When charger is plugged in, drive function of machine is automatically inhibited.
During charging
§
Ensure there is enough airflow to help keep the batteries as cool as possible.
§
If the batteries are swollen turn off immediately and call your service technician.
§
Always leave batteries on charge until the charge is COMPLETE. This is indicated
when charger LED turns off.
Charger manual
Please read BA1105—Battery Charger Operating Manual for more information.