background image

Tug Smart—Operating Manual

7

Battery level indicator

The battery level indicator indicates the amount of charge left in the batteries. When it 

appears to be running low, return the unit to the closest charging station to charge the 

batteries. Being aware of the level of charge of the batteries will eliminate the possibility 

of running low on power whilst away from the charging station. 
Red light only indicates no usable battery power remaining.
The battery level indicator may blink from time to time. This is normal as battery voltage 

is frequently monitored.

Horn (where fitted)

Push to sound the horn, release to turn off.

Charger socket

The charger socket is located on the body panel of the unit, below the tiller post. 

The machine is disabled whenever the charger is plugged in.

Brakes

When the speed control lever is released, the unit is slowed electrically by dynamic 

braking until the machine and load comes to a complete stop. The electromagnetic 

brakes (park brakes) will then be applied. These brakes are also applied shortly after the 

speed control lever is released.

Load capacity

Refer to the serial plate for the unit’s safe working load, located on the body adjacent to 

the tiller post.

Содержание Tug Smart

























Отзывы: