© ElectroCraft 2022
11
High Power Universal Drive User Manual
If any damage is noted, or if the unit is the wrong type, contact your ElectroCraft sales representative
immediately.
Your CPP-A24V80A-SA-CAN or CPP-A40V24A-SA-CAN has arrived carefully packaged from
ElectroCraft, in an antistatic bag. As you unseal this bag, inspect the contents carefully. There should
not be any loose or damaged parts inside.
Never attempt to operate or power-up the drive if there is any visible external damage or if there are loose
materials inside the chassis. While unpacking, if you discover any loose or damaged parts, notify
ElectroCraft within two working days.
ElectroCraft recommends that all packing materials be saved in the event that the drive needs to be
returned. Always place the drive in the same antistatic bag used in the original shipment. Anti-static filler
material should always be placed around the drive so that it cannot shift inside the box. Extreme care
should be exercised when placing packing material around all external connectors to prevent mechanical
stress damage.
All material to be returned to ElectroCraft must have a Return Material Authorization (RMA) tracking
number assigned before shipment. This can be obtained by contacting ElectroCraft. Any product
returned without this number will be rejected by ElectroCraft.
Always insure your shipment for the proper replacement value of its contents. ElectroCraft will not
assume responsibility for any returned goods that have been damaged outside of our factory because of
improper packaging or handling. All goods shipped to ElectroCraft must be shipped FREIGHT PREPAID.
2
Introduction to ElectroCraft
CompleteArchitect™ PC Software
ElectroCraft
CompleteArchitect™
is a Windows
-based software tool used for setup, configuration,
system diagnostics and motion control management. CompleteArchitect
TM
will lead the user through a
step-by-step Wizard to create the correct configuration and information required for the user to run a
particular motor with CPP-A24V80A-SA-CAN or CPP-A40V24A-SA-CAN drives. The result will be an
“Application” containing all the configuration information required to operate the motor with the
drive. Please refer to the CompleteArchitect
TM
user manual document number 198-0000021 for full
documentation support to properly configure and operate the drive.
When connecting a PC to the drive via USB it is recommended that an USB isolator is used. The isolator
is connected inline between the PC (upstream) and drive (downstream) and can transfer both data and
power. This isolator will act to protect the host PC from damage that can come from noise, voltage spikes,
surges, or ground loops. Many commercially available isolators are available, contact ElectroCraft for
further details.
Windows
is a registered trademark of the Microsoft Corporation.
