
STEP 1
Make sure the unit is set to
“Off”
and the unit is
unplugged
.
STEP 3
Grasp the top. Remove the top by
pulling gently up.
STEP 2
Using a #2 Philips screwdriver,
remove the four screws that hold
the top onto the unit.
CleanBreeze Series
REPLACING superHEPA and/or CARBON FILTERS
STEP 4
Reach inside the unit, and remove
felt pad.
STEP 5A or
Remove the carbon filter along
with the 0.1 micron superHEPA
filter. (pull up gently by placing
thumbs on the inner side of the
filter)
STEP 5B
Remove the carbon filter along
with the 0.1 micron superHEPA
filter. For 5” ultra models, use
straps to pull up gently.
FILTER ASSEMBLY HD and Ultra
The model you have selected is shipped in 2 separate boxes to protect certain components. The
filter comes in one box, and the outer shell of the unit, containing the motor and the fan, comes in
another. Filters must be installed before turning the unit on in order for it to work. AllerAir
technicians recommend removing the base, installing the filter, and replacing the base according to
steps 1 - 4 and 12 - 16 of the following procedure.
PRE-FILTER ORDER REFERENCE NUMBERS*
Models
Prefilters
AirMedic Pro 5
AirMedic Pro 6
Notes
Exec, Vocarb
Poly Prefilters
A5FMP009
A6FMP012
packs of 4 or 8
S Models
Tacky Prefilters
A5FMPS09
A6FMPS12
packs of 5 or 10
Ultra Models
Poly Prefilters
A5FMP911
A6FMP1211
packs of 4 or 8
MCS Models
Cotton Prefilters
A5FCP019
A6FCP022
packs of 6
*Please use the above part numbers when ordering your replacement parts.
To order a new pre-filter, call AllerAir toll-free at 1-888-852-8247 during regular business hours (EST), or
send an e-mail to [email protected]
4
Visit our clean air news blog: https://www.allerair.com/blogs/clean-air-news-blog
Содержание Clean Breeze III
Страница 2: ...CleanBreezeIII ...