Electroconcept SCANNER 30, Инструкция по эксплуатации

Страница: 5 / 9

MENU DESCRIPTION
Mode DMX
Master Mode slave1,slave2
Stand-Alone Mode : Auto 0/Auto 1 /Auto 2/Auto 3
Sound Mode / volume control
Activation/Deactivation backlight
pan and tilt inversion
reset configuration
DMX Set Adress DMX address selection 001-512 (A001-A512)
Channel Set Selection of DMX mode 9 or 11 channels
Mode Set MAST/SL 1/SL 2 Master/Slave mode selection
Show Set
Show1/2/3/0 Auto Mode selection 0/1/2/3
Sound Sense 0-100 Micro sensitivity from 0 to 100
No DMX set bLAc/Auto/Soun/Hlod DMX512 Mode off
Led Backlight ON/OFF Activation/Deactivation backlight
Pan Inverse ON/OFF pan inversion
Tilt Inverse ON/OFF tilt inversion
Reset ON/OFF
3.2 DMX wiring
This product uses 3-pin XRL connectors for the DMX512 connection:
Pin 1 : Ground , Pin 2 : Data (-), Pin 3 : Data (+).
Example : connection between different fixtures in Master/Slave mode:
NB : in order to reduce signal errors, think of using a plug a the end of your DMX link.
5