ELECTROCOMPANIET EMC 1UP, Руководство пользователя

Страница: 5 / 14

5
Unpacking the EMC 1UP
Immediately upon receipt of the EMC 1UP CD player, inspect the carton for
possible damage during shipment. The carton and packaging have been
designed to provide the safest possible protection for transport of your
EMC 1UP. Unpack the unit carefully. Save all packaging materials for future
shipment.
The contents of the carton
1 pcs Electrocompaniet: EMC 1UP CD player.
1 pcs AC mains cord.
1 pcs inspection card.
1 pcs CD clamp.
1 pcs self-adhesive felt ring for placement of the CD clamp when not in use.
1 pcs spirit (bubble) level for leveling of the CD player.
2 pcs Allen keys for securing of the Electro Mechanical Cancellation System.
1 pcs remote control
2 pcs batteries.
Important Notice
The transport screw must be removed for proper operation. When moving the
CD player. Always re-insert and tighten the transport screw to avoid severe dam-
age to the unit!
For optimal sonic performance, the EMC 1UP should be burned in for a mini-
mum time of 72 hours. The easiest way to burn in your EMC 1UP is to put a disc
in REPEAT mode with the rest of your system turned off. In daily operation, switch
off the CD player by using the STANDBY button on the remote. If the CD player
has been switched off, allow two hours of warm-up to optimize sonic performance.
Due to high class A operation in all Electrocompaniet designs, it is normal for the
CD player to feel warm. Proper ventilation is important. The CD player should by
no means be completely covered. A good rule of thumb is to allow at least 3 - 5
cm (1 - 2 inches) of air sidewise, and 5 - 8 cm (2 - 3 inches) above the CD player.
Please refer to Owners Manual for removal of the CD transport screw.