manualshive.com logo in svg

ELECTROCOMPANIET ECI 6 MKII, Руководство пользователя

Поделиться
Скачать
ELECTROCOMPANIET ECI 6 MKII Скачать руководство пользователя страница 5

5

ENG

12V trigger Input/Output

The 12V trigger output may be used to automatically power up a CD-player (or other 

equipment with 12V trigger input) when ECI 6DX MKII is powered up. When ECI 6DX 

MKII powers up the 12V trigger output will be set to 12V and will support up to 75 

mA current output. Please keep the current draw below 75 mA by limiting the number 

of devices connected to the 12V trigger output. 

The ECI 6DX MKII will power up (leave standby) when a voltage in range 8-20V (AC 

or DC) is present on the 12V trigger input, and stays powered on for as long as the 

voltage is present. The current draw at the 12V trigger input is 3.3mA.

RS-232 Control Port

The RS-232 control port may be used in home installation setups or general usage for 

controlling basic functionality on the ECI 6DX MKII. Please refer to document "ECI6DX 

RS232 Command Reference V1.pdf" for further information. This document may be 

downloaded from www.electrocompaniet.com

Streaming from your network, or the internet

The media streamer of the ECI 6DX MKII can connect to your network wirelessly, or using 

a cable. For optimal stability, a cabled connection is recommended.

Since the ECI 6DX MKII supports gigabit ethernet, category CAT5e or higher is recom-

mended. We recommend the use of unshielded cables (UTP), to avoid ground loops.

When using a wireless connection, one has a choice between using a 2.4GHz or a 

5GHz network. The optimal choice is highly dependent on the environment. Generally 

speaking, 5GHz is recommended for short-range since it will then offer the highest 

throughput and stability. At longer ranges, 2.4GHz is recommended due to its superior 

range.

Direct USB input 

(square USB-B connector):

This connection is to use the amplifier as a sound-card for your PC. It allows you to play up 

to 196kHz/24bits directly through the DAC of the amplifier.

USB media library input 

(rectangular USB-A connector):

This connects to the streamer and allows you to attach music storage media, such as USB 

sticks and hard drives. These can then be added to the music library, making these files 

always available for playback.

From within the app, go to More (...) -> Bluetooth to enable pairing. The red LED on the 

front panel flashes to indicate the unit is in pairing mode. Go to your phone or tablet’s 

Bluetooth settings to find your unit and connect to it. Subsequent connections from the 

paired device wil not need pairing to be enbled.

ENABLING

Содержание ECI 6 MKII





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды