Electro-Voice ZLX-BRKT, Установочная инструкция, Страница: 4 / 11

Installation
Installing ZLX Mounts
The ZLX Wall Mount Bracket is designed for use with all of the ZLX Series loudspeakers.
To attach the mounts to a ZLX Series loudspeaker, do the following:
1.
Remove the top handle from the loudspeaker by removing the four (4) screws. Keep
these screws to assemble the upper mount.
Top Handle
Bottom Handle
Figure 2.1: Remove Handles
2. Remove the bottom handle from the loudspeaker by removing the four (4) screws. Keep
these screws to assemble the lower mount. (See Figure 2.1.)
3. Attach the upper mount to the loudspeaker with four (4) of the screws from step 1,
where the top handle was located in the up position. If you are attaching the upper
bracket to a 15 inch ZLX loudspeaker attach the upper mount in the down position.
2
ZLX-BRKT ZLX Wall Mount Bracket
01 | F01U285494 Electro Voice