Item C
(x4)
Step 1: Attach Spanning Brackets
Remove the single-stud fittings on the top of
the enclosure by removing the four screws, and
remove the two decals on the bottom of the en-
closure by using a knife or razor blade (Figure 3).
Install the four spacers (Item D) and two spanning
brackets (Item B), using the eight flat head screws
(Item C). Thread two M8 cap screws (Item E) into
the front threaded hole of each spanning bracket,
until they are flush with the bottom of the spanning
bracket (Figure 4).
MB3 Mounting Bracket Includes
Item Description
Qty.
A
U-Bracket
1
B
Spanning Bracket
2
C
Screw, 10-32 x 1-3/4”, Flat Head
8
D
Spacer
4
E
Socket Head Cap Screw, M8x20mm
4
F
Washer, M8
2
G
Lock Washer, M8
2
Item D
(x2)
Item B
Figure 3:
Removing hardware on the Zx3
Figure 4:
Installing the Spanning Brackets
Item E
Item C
(x4)
Item D
(x2)
Item B
Item E
