Frequency Response:
Windscreen Assembly:
Microphone Positioning:
Polar Response:
Product Dimensions:
The windscreen assembly is supplied with a plastic
adaptor to improve stability.
To apply: Hold the windscreen firmly at the “A” loca-
tions. Firmly press the microphone into the adaptor
until it stops.
NOTE: Use caution when removing the microphone
from the windscreen. Do not pull on product wire: grip
microphone by metal housing only.
Best results will be achieved with the microphone positioned 3 to 6 inches below the neckline. Typical locations
are on the lapel, shirt collar, or on the shirt directly below the chin. You should avoid covering the microphone with
any cloth or other material as this may change the frequency response characteristic of the microphone.
If mechanical noise from the cable is detected, it may be minimized by looping the cable up and through the dual
tie clip as shown in the picture on page 1, or by immobilizing the cable against the talker’s body.
Dimensions are in inches. Bracketed dimensions are millimeters.
