Electro-Voice | RE3-ACC-RMK1 Rack mount kit for single
RE3 receiver
RE3-ACC-RMK1 Rack
mount kit for single RE3
receiver
▪
Securely mounts receiver into single 19" rack space
▪
Mounting sockets for front mounting antennas
▪
Two high-quality RG-58 50 Ω front-mount cables
▪
Socket plugs fill antenna mount holes when not
used
▪
Includes rack ears, cables, mounting screws, and
hole plugs
The RMK1 kit contains all necessary items to mount
one RE3-RX receiver into a 19” rack. The rack ears
easily mount to the receiver’s threaded mounting
holes using the provided screws. The threaded front
flange mount ends of the antenna cables mount into
the rack ears and securely mount either the stock
receiver ½ wave antennas, or coax extension cables
for remote antenna applications. The plastic socket
filler plugs can be used to plug antenna mounting
holes if desired.
Technical specifications
Coax type:
RG-58
Coax impedance:
50 Ω
Color:
Black
Net weight:
15.48 oz. (439 g)
Gross weight:
17.6 oz. (500 g)
Dimensions:
111 mm
136 mm
44 mm
Installation/configuration notes
Installing the rack kit
To install the rack kit, do the following:
Bosch Security Systems, Inc.
Made In Taiwan
RE3 WIRELESS RECEIVER
Serial No.
Freq.
UNBALANCED
AF OUTPUT
Antenna A
12VDC Out
100 mA
AF OUTPUT
BALANCED
10
DCV INPUT
-
+
DC12~15VDC
500 mA
Antenna B
12VDC Out
100 mA
1. On a flat surface, lay out the RE3 receiver.
2. Locate the rack ears and supplied screws.
Ears will mount on either side of the receiver as they are
the same orientation.
3. Attach the rack ears to the receiver chassis by using
two screws per ear.
The rack ear mounting holes will line up with the pre-
tapped holes in the receiver side.
