Specifications
Element
Dynamic
N/DYM
®
magnet structure
Frequency Response
Close Response
30 Hz to 22 kHz
Far Response
60 Hz to 22 kHz
Polar Pattern
Supercardioid
Impedance
Low-Z balanced (150 Ohms)
Sensitivity
Open Circuit Voltage
3.1 mV/Pascal @ 1.0 kHz
Power Level
(0 dB=1mW/pascal) -51dB @ 1.0 kHZ
Microphone Connector
3-pin, XLR-type
Equivalent Output Noise
14 dB A weighted (0 dB=0.00002 pascal)
Polarity
Positive pressure on diaphragm causes
Positive voltage on pin 2 ref. Pin 3
Finish
Non-reflecting black
Materials
Memraflex
™
grille screen
Dimensions
Length
@ 4.5 in. (115 mm)
Diameter
@ 2.05 In. (52 mm)
Shank
@ 0.80 in. (20 mm)
Weight
Net
@ 6.7oz (190 g)
Shipping
@ 16 oz (453 g)
Accessories included
311 stand clamp
Soft zippered “gig” bag
N/D468
Instrumental Microphone
Standard Placement & Use Guidelines
1. Always point the microphone at the desired source of
sound, and away from any unwanted sources.
2.The microphone should be located close to the sound
source to minimize interference from other potential
sound sources.
3. Use the 3-to-1 rule when using multiple microphones.
Place each microphone three times farther from other
microphones as from the desired sound source.
4. Minimize over-handling of the microphone to reduce
unwanted mechanical noise.
5.Working close to the microphone will increase the bass
tone and also provide increased gain-before-feedback.
Warranty
This product is guaranteed against malfunction from any
cause for two (2) years from the date of original purchase.
In addition, the Limited Warranty for the acoustic system
contained in the microphone shall apply for the life of this
product, defines as a period of ten (10) years from the date
that the manufacture of this microphone model has been
discontinued. Any and all active electronics incorporated in
this microphone are guaranteed against malfunction due to
material workmanship for a period of three (3) years from
the date of original purchase.This Limited Warranty does
not extend to cables, connectors, or switches.
For warranty service please call us at:
616-695-6831 or 1-800-234-6831
330º
0º
30º
60º
90º
120º
150º
180º
300º
270º
240º
210º
www.electrovoice.com
•
Telex Communications, Inc.
•
www.telex.com
©Telex Communications, Inc. 6/2000 Part Number 535835
USA
12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-884-4051, FAX: 952-884-0043
Canada
705 Progress Avenue, Unit 46, Scarborough, Ontario, Canada, M1H2X1, Phone: 416-431-4975, 800-881-1685, FAX: 416-431-4588
Switzerland
Keltenstrasse 11, CH-2563 IPSACH, Switzerland, Phone: 41/32-331-6833, FAX: 41/32-331-1221
Germany
Hirschberger Ring 45, D94315, Straubing, Germany, Phone: 49 9421-706 392, Fax: 49 9421-706 287
France
Parc de Courcerin, Allee Lech Walesa, Lognes, 77185 Marne La Vallee, France, Phone: 33/1-6480-0090, FAX: 33/1-6480-4538
Australia
Unit 23, Block C, Slough Business Park, Slough Avenue, Silverwater, N.S.W. 2128, Australia, Phone: 61/2-9648-3455, FAX: 61/2-9648-5585
Hong Kong
Unit E & F, 21/F, Luk Hop Industrial Bldg., 8 Luk Hop St., San PO Kong, Kowloon, Hong Kong, Phone: 852-2351-3628, FAX: 852-2351-3329
Japan
2-5-60 Izumi, Suginami-ku, Tokyo, Japan 168, Phone: 81-3-3325-7900, FAX: 81-3-3325-7789
Singapore
3015A Ubi Rd 1, 05-10, Kampong Ubi Industrial Estate, Singapore 408705, Phone: 65-746-8760, FAX: 65-746-1206
Mexico
Av. Parque Chapultepec #66-201, Col. El. Parque Edo. Mex. 53390, Phone: (52) 5358-5434, FAX: (52) 5358-5588
UK
4, The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK, Phone: 44 181 640 9600, FAX: 44 181 646 7084
Africa, Mid-East
12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7424, FAX: 952-887-9212
Latin America
12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7491, FAX: 952-887-9212
U.S.A. and Canada only.
For customer orders, contact the Customer Service department at
800/392-3497 Fax: 800/955-6831
For warranty repair or service information, contact the Service
Repair department at 800/685-2606
For technical assistance, contact Technical Support at 800/392-3497
Please refer to the Engineering Data Sheet for warranty information.
Specifications subject to change without notice.
