MONITOR
OUTPUT
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
INPUT2
INPUT6
INPUT3
INPUT7
INPUT4
INPUT8
AUX1
INPUT9
AUX2
INPUT10
Professional Mixer/Amplifier
Professional Mixer/Amplifier
MA-1212
POWER
0
10
BASS
TREBLE
MASTER
+
10
10
10
+
10
Mute
INPUT1
INPUT5
OFF
ON
R
2
1
3
5
6
4
7
8
9
1. "Mute" function switch
This switch lets you turn the "Voice Priority" on or off of input 1 (1).
CONTROL AND FUNCTIONS
2. Input level controls
These controls let you individually set the volume of the sound source that are connected to
the "INPUT 1 ~ INPUT 10","AUX 1" and "AUX 2". Turning a control clockwise increases the
volume of the corresponding source. We recommend to leave the controls of momentarily not
used inputs their minimal setting "0".
3. Music signal monitor output level control
The control lets you individually set the volume of the sound output that are connected to
the "MONITOR OUTPUT" (4) and "1W/8 "(25).Turning controls clockwise increase the
volume of the corresponding source.
4. "MONITOR OUTPUT"
This allows signal output of the "AUX1","AUX2","CASSETTE" and "TUNER" input mixing. It can be
used to control an audio appliance with input impedance over 600 ohms (e.g. Earphone or an
additional amplifier etc.) The output signal is controlled only by the volume controls of the "AUX 1",
"AUX 2", "TUNER" and music signal level control (3). This function is toggle switch the "1W/8 "
(25) additional loudspeaker.
5. Indicator
When switch the amplifier's power on. The "PL" indicator lights. When the amplifier's output overload
the "OVER LOAD" indicator lights and interrupt output. For equipment life, you have to adjust the volume
at a lower setting.
6. "POWER" switch
Using the POWER switch lets you turn the main power on or off.
7. MASTER volume control
The setting of this control determines the output that is present at the loudspeaker OUTPUT. We
recommend to generally adjust the MASTER and the input level controls at mediocre positions.
extreme setting, where the MASTER is set to maximum output and the input controls nearly set to
their minimum or vice versa are not recommendable.
3
8.Common TREBLE-control
Clockwise this control enhances the high frequency reproduction, while turning it counter
clockwise attenuates the treble frequencies. If the control is set to its center position, the
overall frequency response is not being altered.
