8
en | Monitor and pole-mount operation
MFX Multi-Function Monitors
2019-06 | 01 | F.01U.361.835
Installation manual
Electro-Voice
3
Monitor and pole-mount operation
3.1
Monitor operation
MFX Multi-Functional Monitors provide two monitor angles, depending on the loudspeaker
orientation.
Setting up a loudspeaker as a near field floor monitor
Figure
3.1: Monitor angle for close use
To set up a loudspeaker as a near field floor monitor, do the following:
1.
Place the loudspeaker on a level stable surface.
2.
Position the loudspeaker at an angle of 55° relative to supporting surface so that its main
axis is pointed at the performer.
3.
Safely route cables to prevent injury to performers, production crew, and audience
members.
Using the alternate 35° monitor angle
Using the alternate 35° monitor angle, the loudspeaker can be set up as a distant use floor
monitor, a drum monitor, a keyboard monitor, or a side fill.
Figure
3.2: Monitor angle for distant use
To set up a loudspeaker as a distant use floor monitor, do the following:
1.
Place the loudspeaker on the floor or on a level stable surface at the desired height.
2.
Aim the loudspeaker toward the performer at an angle of 35°.
3.
Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
