# of Enclosures
# of Kits Req’d
in Array:
M
b
200
M
b
300
2
2
1
3
3
2
4
4
3
5
5
4
6 (complete circle)
6
6
Description
The M
b
200 installation kit consists of a
U-bracket, two M8 x 1.25 hex-head bolts,
four lock washers, two friction pads, and two
3
/
8
-24 hex-head bolts (see Chart 1). The kit
is designed to accommodate the System
200
TM
installation in a variety of ways.
Wall or Ceiling Mounting:
The robust design of the M
b
200 installation
bracket allows the System 200
TM
speakers
to be mounted in almost any position to ob-
tain the desired sound coverage (see Figure
3).
Flying Installations
The M
b
200 bracket “captures” the speaker
in a rigid frame which has structurally sound
locations for attaching rigging hardware.
These attachment points are four 12.7-mm
(
1
/
2
-in.) diameter holes located on the ends
of the bracket. A
3
/
8
-in. “quick link” (or simi-
lar hardware) can be readily connected to
each attachment point.
System 200
TM
speakers can be flown indi-
vidually in either a horizontal or vertical po-
sition, or two speakers can be flown together
in a vertical position (see Figures 4 and 5).
System 200
TM
Horizontal Arrays
Arrays of two to six speakers are securely
supported in a frame comprised of M
b
200
and M
b
300 brackets. To create a horizontal
array, two M
b
200 brackets are simply locked
into the correct alignment position using the
brackets from the M
b
300 Horizontal Array
Mb200
And Mb200W
Installation Kit
• Mounting kit for System
TM
200
speakers
• May be used in conjuction with
OmniMount
®
Series 100 support
system
1
• Versatile design allows the
speaker to be aimed at any angle
from wall or ceiling
• Provides a rigid frame for flying
one or two speakers
• Creates arrays of two to six speak-
ers when used with the M
b
300
Horizontal Array Kit
Kit (see Figure 6). The array is extended by
using one additional M
b
200 bracket and one
M
b
300 kit for each additional speaker. To
complete the circle for a six speaker array,
one additional M
b
300 kit is required. Please
refer to Chart 2 to select the exact number of
each kit needed, based on desired array size.
(Note: refer to M
b
300 Horizontal Array Kit
engineering data sheet for detailed instruc-
tions on System 200
TM
horizontal array con-
struction using M
b
200 Installation and
M
b
300 Horizontal Array Kits.)
Item
Description
Quanity
Part Number
A
Bracket
1
71914
B
M8 x 1.25 hex head bolt
2
63310
C
5/16 split ring lock washer
2
38144
D
3/8-24 hex head bolt
2
63311
E
3/8 split ring lock washer
2
38834
F
Friction washer
2
38829
CHART 2: Kit Requirements for
System 200
TM
Horizontal
Array Construction
CHART 1: M
b
200 Installation Kit Parts List
