manualshive.com logo in svg

Electro-Voice FRi-2082, Руководство пользователя

Поделиться
Скачать
Electro-Voice FRi-2082 Скачать руководство пользователя страница 7

F

 

R

 

i

S P E A K E R

S Y S T E M S

Installation 

Environments

6

Interior Installation

The standard FRi cabinets are constructed for indoor

installation to provide years of trouble-free service. The

paint on the cabinets is textured and highly durable. Should

you endeavor to paint your cabinet another color, clean

and prep the cabinet as you would following standard

painting practices.

The metal grille on the cabinets is designed to 

accommodate custom-colored, acoustically transparent

fabrics which wrap neatly around the grille and is held in

place by U-channels (included). This allows the flexibility

to match most interior design requirements. We suggest

the use of acoustically transparent fabrics as supplied by

Stevenson & Lawyer (Tel. 1-800-968-5535) or equivalent

to ensure maximum performance and safety.

Outdoor Installation

Should your application call for outdoor installation, 

locate the cabinet to provide protection from direct 

exposure to sunlight, rain and other weather conditions. 

Содержание FRi-2082





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды