Electro-Voice EVU-1062/95, Руководство пользователя

Страница: 19 / 28

19
Installation
WARNING: The Universal U-Bracket is designed to hold the weight of one (1) loudspeaker. Never attempt to mount
multiple loudspeakers to a single U-Bracket.
To install the assembled U-Bracket to the enclosure , do the following:
NOTE: All EVU systems are assembled in the following manner:
Tools: #2 Phillips screwdriver
1.
Remove two (2) M8 flat head screws (C) from each end of the loudspeaker enclosure (A).
2.
Position the loudspeaker enclosure inside the universal U-Bracket (B).
3.
Place one (1) M8 rubber washer (D) between the enclosure’s screw hole and the universal U-Bracket on each side of
the enclosure.
NOTE: See Figure 29 for holes specific to the system being mounted.
4.
Securely fasten one (1) M8 panhead screw through the bracket, washer, and enclosure on each side of the assembly.
5.
Position the loudspeaker at the desired angle.
FIGURE 29.
Universal U-Bracket Assembly