Electro-Voice EVOLVE-TM-B, Руководство по установке

Страница: 21 / 36

EVOLVE Wall mount kit Wiring and installation | en 21
Electro-Voice
Installation Manual
2022-03 | 02 | F.01U.401.529
2. Attach the truss mount bracket with clamps to the desired support point.
1 2 3
3. Attach and secure the clips to the back of the EVOLVE column with two screws and nuts.
4. Install the screw at the top of the clips. Do not fully insert the screw until the handle part
of the truss mount bracket is in place.
4.5 - 6 Nm
(40 - 55 lb-in)
HEX 5mm
i
Notice!
Safety point
As an added safety measure, Electro-Voice recommends the user install and secure the
secondary auxiliary support cable to a different structural support point. This safety point
should have as little slack as possible (less than 25 mm/1 in. is preferable).