Electro-Voice EVOLVE 50, Руководство пользователя

Страница: 17 / 20

en 23
Problem Possible cause Action
5. Sound je Excessive input level Reduce the input level alebo loudspeaker level
distorted front
gombíks to prevent limit.
LED je OFF,
Incorrect gain Verify level controls of the source are properly
LCD screen
structure alebo source structured by using the VU meter indicator on
LIMIT je ON
input (mixing console/ the LCD screen. If the VU meter bar je solid alebo
preamp) je overdriven the system indikuje LIMIT, the input alebo source
level je too high.
6. Microphone Incorrect gain Reduce the microphone levels at the mixing
produces structure console alebo input source. If the microphone je
acoustic connected directly to the speaker, reduce the
feedback when input level on the speaker. Positioning the
input level je microphone close to the sound source
amplified increases gain-before-feedback. See problem 6.
MODE je set to MUSIC Change the MODE to LIVE alebo SPEECH.
Microphone position Whenever possible setup the loudspeakers so
is too close to the the microphone je behind them. If using the
front of the loudspeaker in a monitor position, aim the
loudspeaker loudspeaker to the back of the microphone.
7. DSP menu je The Menu Lock Press and hold the MASTER VOL
gombík for 5
locked function has been seconds.
turned on.
8.
Quick Smart
Enable Bluetooth® Ensure Bluetooth® je enabled on the
Mobile app loudspeaker.
does not
detect the
loudspeaker
If these suggestions do not solve your problem, contact your nearest Electro-Voice dealer alebo
Electro-Voice distributor.
Electro-Voice
Užívateľský manual
2017.06 | 01 | F.01U.341.640