Electro-Voice EVID S Series, Руководство по установке

Страница: 9 / 48

EVID Surface Mount S Series - X Models Installation and wiring | en 9
Electro-Voice
Installation Manual
2022-03 | 07 | F.01U.345.358
2. Insert the two screws (provided) into the U-Bracket mounting points.
Loosely tighten the two screws using the Allen wrench (provided).
3. Aim the speaker .
4. Tighten the two screws to secure the U-Bracket to the speaker.
Ensure the speaker is secured to the U-Bracket.
Safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This safety point should have as little slack as possible (less
than 1-inch is preferable).
Figure 3.1: Redundant safety point
Refer to
– U-Bracket installation options, page 9
– Wiring, page 11
3.2 U-Bracket installation options
Using a U-Bolt
The U-Bracket can be mounted using a standard 2-inch or 4-inch U-Bolt.