ENG 618 Integrated Shotgun/Boom-P
ole Microphone
ENG 618 Integrated Shotgun/Boom-Pole Microphone
2
The headphone jack could also be used to
connect to a portable tape recorder for quick
minimal equipment coverage.
Each segment of the telescoping boom pole
can be secured with a twist of the collet at
any position along its length. By loosening,
the segments can collapse quickly into each
other. Folding the microphone toward the
handle allows the unit to locate into the base
for storage.
Architectural and Engineering
Specifications
The microphone shall be a back-electret con-
denser with a hypercardioid-line polar
pattern.The microphone shall be used in the
manner of a handheld microphone. The
microphone shall have a frequency re-
sponse from 50 Hz to 8 kHz with a swit-
chable 200 Hz roll-off. The product shall
have a balanced output with a 100-ohm
nominal impedance. The open-circuit output
voltage shall be 19 mV/pascal. The micro-
phone capsule shall be made of brass; the
electronics housing shall include a bass roll-
off filter circuit, an adjustable output 9-volt
battery-powered headphone amplifier and a
low-battery LED indicator.
The microphone shall be permanently con-
nected to its extension boom pole and elec-
tronics module via an internal coiled, shielded
miniature audio cable. The boom pole shall
be capable of being extended and made se-
cure at any position along its length.The fin-
ish on all exposed surfaces shall be a non-
reflecting black. The microphone shall be
supplied with windscreen and storage pouch.
The ENG 618 is specified.
Limited Warranty
Electro-Voice products are guaranteed
against malfunction due to defects in mate-
rials or workmanship for a specified period,
as noted in the individual product-line
statement(s) below, or in the individual prod-
uct data sheet or owner’s manual, beginning
with the date of original purchase. If such
malfunction occurs during the specified pe-
riod, the product will be repaired or replaced
(at our option) without charge. The product
will be returned to the customer prepaid. Ex-
clusions and Limitations: The Limited
Warranty does not apply to: (a) exterior fin-
ish or appearance; (b) certain specific items
described in the individual product-line
statement(s) below, or in the individual prod-
uct data sheet or owner’s manual; (c) mal-
function resulting from use or operation of
the product other than as specified in the prod-
uct data sheet or owner’s manual; (d) mal-
function resulting from misuse or abuse of
the product; or (e) malfunction occurring at
any time after repairs have been made to the
product by anyone other than Electro-Voice
Service or any of its authorized service rep-
resentatives. Obtaining Warranty Service:
To obtain warranty service, a customer must
deliver the product, prepaid, to Electro-Voice
Service or any of its authorized service rep-
resentatives together with proof of purchase
of the product in the form of a bill of sale or
receipted invoice. A list of authorized ser-
vice representatives is available from Electro-
Voice Service at 600 Cecil Street, Buchanan,
MI 49107 (800/234-6831 or FAX
616/695-4743). Incidental and Conse-
quential Damages Excluded: Product re-
pair or replacement and return to the customer
are the only remedies provided to the cus-
tomer. Electro-Voice shall not be liable for
any incidental or consequential damages in-
cluding, without limitation, injury to persons
or property or loss of use. Some states do not
allow the exclusion or limitation of inciden-
tal or consequential damages so the above
limitation or exclusion may not apply to you.
Other Rights: This warranty gives you spe-
cific legal rights, and you may also have other
rights which vary from state to state.
Electro-Voice Wired Microphones are
guaranteed against malfunction from any
cause for two (2) years from the date of origi-
nal purchase. In addition, the Limited War-
ranty for the acoustic system contained in
these microphones shall apply for the life of
the product, defined as a period of ten (10)
years from the date that the manufacture of
the specific microphone has been discontin-
ued. Any and all active electronics incorpo-
rated in these microphones are guaranteed
against malfunction due to defects in mate-
rials or workmanship for a period of three
(3) years from the date of original purchase.
The Limited Warranty does not extend to
cables, cable connectors, or switches. Addi-
tional details are included in the Uniform
Limited Warranty statement.
For warranty repair or service informa-
tion, contact the service repair department
at: 616/695-6831 or 800/685-2606.
For technical assistance, contact Technical
Support at 800/234-6831 or 616/695-6831,
M-F, 8:00 a.m. to 5:00 p.m. Eastern Stan-
dard Time.
Specifications subject to change without no-
tice.
