Installing the eyebolts
To install the eyebolts, do the following:
1.
Remove the three fly point covers from the suspension points.
2.
Install M10 eyebolts and washers into the suspension points.
!
Warning!
Eyebolts must be fully seated and oriented in the plane of pull. Always use washers under the
eyebolt to distribute the load on the enclosure.
B
A
Figure 4.2: Eyebolt shown with washers (A) and without washers (B)
ELX200 Passive Loudspeakers
2017.10 | 01 | F.01U.326.890
Installation manual
Electro-Voice