Electro-Voice® Zx3 Owner’s Manual
Suspending Zx3 Speaker Systems (cont’)
Suspending the Zx3 using optional Electro-Voice Single-Stud Rigging Kits
The Zx3 is shipped with two single-stud anchor plates for rigging with single-stud rigging. There are two
more locations on the bottom to mount single-stud anchor plates for flying the Zx3 upside-down or hori-
zontally. All of these locations can facilitate M8 Eyebolts if desired as well.
Figure 4:
Suspending the Zx3 Using Included
Single-Stud Anchor Plates
Kit Used (Left View) -
SSK-1 Single-Stud Rigging Kit (x1)
Kits Used (Right View) -
SSK-1 Single-Stud Rigging Kit (x2)
EBK-3 Forged M8 Eyebolt Kit (x1)*
Figure 5:
Suspending the Zx3 Upside-Down Using
Included Single-Stud Anchor Plates and
Single-Stud Rigging Kit
Kits Used -
RK-Z Single-Stud Anchor Plate Kit (x1)
SSK-1 Single-Stud Rigging Kit (x1)
Step 1: Remove Decals
Step 2: Attach Single-Stud Anchor
Plates Removed from the Top of the
Enclosure or Optional RK-Z Kit (Shown)
or Eyebolts (Not Shown
*EBK-3 on Bottom of Top Enclosure
(Not Shown, See Figure 3b)
5
