4
WARRANTY
Electro-Tech Systems, Inc. warrants its equipment, accessories and parts of its manufacture to
be and remain free from defects in material and workmanship for a period of one (1) year from
date of invoice and will, at the discretion of Seller, either replace or repair without charge, F.O.B.
Glenside, similar equipment or a similar part to replace any equipment or part of its manufacture
which, within the above stated time, is proved to have been defective at the time it was sold. All
equipment claimed defective must be returned properly identified to the Seller (or presented to
one of its agents for inspection). This warranty only applies to equipment operated in accordance
with Seller's operating instructions.
Seller's warranty with respect to those parts of the equipment which are purchased from other
manufacturers shall be subject only to that manufacturer's warranty.
The Seller's liability hereunder is expressly limited to repairing or replacing any parts of the
equipment manufactured by the manufacturer and found to have been defective. The Seller shall
not be liable for damage resulting or claimed to result from any cause whatsoever.
This warranty becomes null and void should the equipment, or any part thereof, be abused or
modified by the customer of if used in any application other than that for which it was intended.
This warranty to replace or repair is the only warranty, either expressed or implied or provided by
law, and is in lieu of all other warranties and the Seller denies any other promise, guarantee, or
warranty with respect to the equipment or accessories and, in particular, as to its or their
suitability for the purposes of the buyer or its or their performance, either quantitatively or
qualitatively or as to the products which it may produce and the buyer is expected to expressly
waive rights to any warranty other than that stated herein.
ETS must be notified before any equipment is returned for repair. ETS will issue an RMA (Return
Material Authorization) number for return of equipment.
Equipment should be shipped prepaid and insured in the original packaging. If the original
packaging is not available, the equipment must be packed in a sufficiently large box (or boxes if
applicable) of double wall construction with substantial packing around all sides. The RMA
number, description of the problem along with the contact name and telephone number must be
included in formal paperwork and enclosed with the
instrument. Round trip freight and
related charges are the owner’s responsibility.
WARNING
WOODEN CRATES MUST NOT BE USED. PACKAGING OF
DELICATE INSTRUMENTS IN WOODEN CRATES
SUBSTANTIALLY INCREASES THE CONTENT’S
SUSCEPTIBILITY TO SHOCK DAMAGE. DO NOT PLACE
INSTRUMENTS OR ACCESSORIES INSIDE OTHER
INSTRUMENTS OR CHAMBERS. ELECTRO-TECH SYSTEMS,
INC. WILL NOT ASSUME RESPONSIBILITY FOR ADDITIONAL
COST OF REPAIR DUE TO DAMAGE INCURRED DURING
SHIPMENT AS A RESULT OF POOR PACKAGING.
