Electro Spray 3WBJ-8M11, Руководство по эксплуатации

Страница: 13 / 16

7. Trouble Shooting:
No
Common
faults Causes Suggested Respnse
1
The nozzle is not
spraying liquid, or
the flow rate of
the liquid is small,
abnormal.
1. The small filter at the
bottom of the barrel is
blocked;
2. The inlet valve is
blocked;
3. The nozzle is blocked;
4. The wand is blocked;
5. Tank is empty
5. The battery has no
1. Clean the small filter;
2. Pass the inlet valve with a
thin steel wire;
3. Remove the nozzle to
clean the internal parts;
4. Charge or replace the
battery.
5. Fill tank
2
Jet or mist is not
normal
1. The nozzle is damaged;
2. The
nozzle is not
adjusted well;
3.
The pump is not working
properly.
1. Replace the nozzle;
2. Clean and readjust nozzle
3.
Repair the pump by a
professional.
3
Poor electrostatic
effect
1. The electrostatic
generator is not working
properly;
2. Mist spray atomization
effect is not good;
3. There is leakage.
1. Replace the electrostatic
generator;
2. Adjust the nozzle to
enhance the atomization
effect;
3. Check the electric to
remove the leak
4
Liquid droplet
leakage
(determine the
cause according
to the
corresponding
drip position) 1. The liquid tank cover is
not tightened;
2. The liquid hose
connection is leaking 1. Check the barrel seal and
tighten the lid;
2. Check the leak and
replace the parts.
5
Spraying liquid is
not working
1, The battery has no
charge
2, The switch is causing
contact failure
1. Charge or replace the
battery
2. Repair or replace the
switch