Electro-Optics Technology, Inc.
3340 Parkland Ct. Traverse City, MI 49686 USA
(231)935-4044
׀
(800)697-6782
׀
׀
www.eotech.com
Page
4
of
9
5.
You can terminate the detector in 1MΩ input of an oscilloscope to obtain a higher output voltage
signal but this will decrease the detector’s
bandwidth
by a factor of 5x10
-5
.
C.
Increasing the power incident on the detector does not result in a higher voltage signal on the
oscilloscope:
1.
The detector is probably saturated. You should lower the power incident on the detector to a
level below the saturation point.
IV.
Drawings: Non-amplified Photodetectors
A.
ET-2030 Dimensions:
B.
ET-2040, ET-2070 Dimensions:
