manualshive.com logo in svg

Electro Industries 1252, Инструкция по установке и эксплуатации

Поделиться
Скачать
Electro Industries 1252 Скачать руководство пользователя страница 29

e

Electro Industries/GaugeTech 

Doc # E107706   V1.25

2-5

2.   If you are going to use 

DHCP

, click the 

Advanced Settings Button

:  

Click the tab at the top of the DHCP screen.  Click Enable.  
DHCP will automatically enter the IP Address and some or all of the Interface Settings.  
Click OK at the bottom of the screen to return to the Device Profile: Communication Ports 
screen.  You may have to manually enter DNS, Email, Gateway Setting and/or a Unique 
Computer Name.  Click OK.

3.   If you are 

NOT using DHCP

, in the Network Settings section, enter data provided by your 

systems manager:

IP Address:

10.0.0.1            (Example)

Subnet Mask:

255.255.255.0  (Example)

Default Gateway:

0.0.0.0             (Example)

Computer Name:

NETWORK     (Example)

Q

Enter the 

Domain Name Server and Computer Name

.

Q

Customize Web Content

, if desired.  Default Pages with an extensive array of readings comes with

the meter.  The content of the pages can be customized using FTP Client.  

From the Device Profile: Communications Ports screen, click Advanced Settings.  Click the FTP
Client tab on the top of the folder.  Using FTP, you can easily replace any file by using the 
SAME FILE NAME as the one you want to replace.  

Q

Enter the 

Email Server IP Address

.  The Default Settings store 

ONE Email Server IP Address

for

administrative purposes or to send an alarm, if there is a problem.  An 

ADDITIONAL 8

can be con-

figured with FTP Client.

Q

Update 

FIRMWARE

, if needed, with TFTP protocol (see Appendix C).

Q

After the above parameters are set, Communicator EXT will connect via the network using a Device
Address of “1” and the assigned IP Address using the following steps:

1.  Double click on Communicator EXT icon to open.

2.  Click the Connect icon in the icon tool bar.  The Connect screen will appear.
3.  Click the Network button at the top of the screen.  The screen will change to one requesting the 

following information:

Device Address:

1

Host:

IP Address (per your network administrator).
Example: 10.0.0.1

Network Port:

502

Protocol:

Modbus TCP

4.  Click the Connect button at the bottom of the screen.  Communicator EXT connects to the 

Nexus with the Host IP Address via the Network.

Содержание 1252



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды