3
- I/O JACKS -
OUTPUT Jack
– This ¼” jack provides the audio output from the SSD. The
output impedance varies from 100Ω to 25k
Ω
.
Please note:
when powering from
a battery, inserting a plug into the OUTPUT jack turns on the SSD. Remove the
plug from the OUTPUT jack to prolong battery life when not using the SSD.
EXT. TRIG Jack –
Connect this jack to the output of an external trigger source.
We recommend using a ¼” TS plug/cable but a TRS plug may also be used as
long as the trigger signal is present on the tip. The input impedance is 2M
Ω
.
The SSD synthesizer triggers when it receives positive-going pulses or clock
signals. The acceptable trigger amplitude range is 3V to 15V for unipolar signals
or +/-3V to +/-8V for bipolar signals. Nearly all types of gate, clock, and trigger
signals that fall within these voltage ranges will trigger the SSD. Some examples
of acceptable trigger signals include: electronic drum trigger pads; an electronic
pulse (as produced, for example, by the EHX Clockworks); a clock generator
(such as the EHX 8 Step Program); gate signals from synthesizers such as V-
Trigger; simple clock sync signals from drum machines.
Please note:
The SSD does not respond to MIDI. Use a MIDI to CV/Gate
converter if you wish to trigger the SSD with a MIDI device.
AUX IN Jack –
This ¼” jack is the input for an external sound source. The
signal present at the AUX IN jack connects to the SSD’s internal gated amplifier.
When a plug is inserted into the AUX IN jack, the SSD’s internal oscillator
synthesizer is disconnected from the output. The input impedance is 2.2M
Ω
.
Use AUX IN to gate external instruments and sound sources with the SSD’s
trigger. Each time you trigger the SSD ̶ whether you use the EXT. TRIG input or
the pushbutton ̶ the AUX IN signal will be heard at the OUTPUT jack. Use the
TIME knob to set the decay time of the AUX IN signal.
9V Power Jack
– Although the Super Space Drum accepts 9V Batteries, EHX
supplies your SSD with an Electro-Harmonix 9.6DC-200 power supply. Plug the
output of the AC adapter into the 9V power jack located at the top of the Super
Space Drum. The SSD draws 25 mA at 9VDC with a center negative plug. Please
do not exceed 12VDC on the SSD’s power jack.
- CHANGING THE BATTERY -
To change your 9V battery, remove the four screws on the bottom of the Super
Space Drum. Take off the bottom plate and change the battery. Do not touch the
circuit board while the bottom plate is off or you risk damaging a component.
4
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a
product that fails to operate due to defects in materials or workmanship for a period of one year from
date of purchase. This applies only to original purchasers who have bought their product from an
authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please contact the
appropriate office listed below. Customers outside the regions listed below, please contact EHX
Customer Service for information on warranty repairs at [email protected] or +1-718-937-8300. USA and
Canadian customers: please obtain a
Return Authorization Number
(RA#) from EHX Customer
Service before returning your product. Include with your returned unit: a written description of the
problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of
your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: [email protected]
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: [email protected]
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights
depending upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at
www.ehx.com
Email us at
FCC COMPLIANCE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help
.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
