-CONTROLS & I/O Jacks -
Footswitch & Status LED
– When the effect is engaged this red LED will
illuminate. When power is applied, the Status LED glows brightly to signal
that all operational voltages are satisfactory. The LED will not light if the
Bass Preacher is bypassed. Press the footswitch to toggle between effect on
and true bypass mode.
VOL Knob
– Use
VOL
to adjust the amount of makeup gain.
SUSTAIN Knob
– Turn
SUSTAIN
to set the amount of compression.
ATTACK Switch
– Toggle
ATTACK
to set the timing of the attack/decay
curve.
INPUT Jack
– Plug your instrument or the output of another effects pedal
into this ¼” jack. The input impedance is 450k
Ω
.
AMP Jack
– The
AMP
jack outputs the Bass Preacher’s audio signal. The
output impedance ranges from 150
Ω
to 2.8k
Ω
.
9V Power Jack
– The Bass Preacher accepts 9V Batteries, and can also be
powered from an Electro-Harmonix 9.6DC-200 power supply. Plug the output
of the AC adapter into the 9V power jack located at the top of the Bass
Preacher. The Bass Preacher draws 33mA at 9VDC with a
center negative
plug
. The Bass Preacher accepts Boss
®
and Ibanez
®
style AC Adapters
capable of delivering at least 50 mA.
Warning:
Do not use an incorrect power supply or you risk damaging the
Bass Preacher and voiding your warranty. Always check the specifications on
the power adapter you intend to use before plugging it into the Bass
Preacher.
- CHANGING THE BATTERY -
To change your 9V battery, remove the four screws on the bottom of the
Bass Preacher. Take off the bottom plate and change the battery. Do not
touch the circuit board while the bottom plate is off or you risk damaging a
component.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please
contact the appropriate office listed below. Customers outside the regions listed
below, please contact EHX Customer Service for information on warranty repairs at
[email protected] or +1-718-937-8300. USA and Canadian customers: please obtain a
Return Authorization Number
(RA#) from EHX Customer Service before returning
your product. Include with your returned unit: a written description of the problem
as well as your name, address, telephone number, e-mail address, and RA#; and a
copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: [email protected]
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: [email protected]
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the product
was purchased.
To hear demos on all EHX pedals visit us on the web at
www.ehx.com
Email us at
