ELECTRO BRAND BT2165GB, Руководство пользователя

Страница: 5 / 9

2.If the battery is completely charged, the indicator red light turns off.
3.Remove the charging cable from the Speaker and PC.
Note:
Battery Caution
POWER ON/OFF
Note:
-Automatic connection If supported by your player (e.g. mobile phone), the devices will be
connected automatically. The prerequisite for this is:
- In Bluetooth mode, the Speaker will send an alarm sound every 30 seconds or so when the
battery is nearly exhausted.
The unit is operated by an integrated lithium battery. Charge the battery as follows:
1.Plug the micro B USB plug of the charging cable into the jack of the unit. Connect the USB
plug to a powered-on computer. The indicator lights up red and the battery begins to charge.
--The battery (batteries or battery pack) should not be exposed to excessive heat such as
sunshine, fire, etc.
-Battery could burst open if incorrectly replaced. Replace only with the same or equivalent type.
- Turn on the Speaker by pressing and holding Standby button. The Bluetooth indicator will
start to blink.
-Device (i.e., mobile phone) will connect if:
1.Devices were already paired with each other.
2.Bluetooth is activated in your player.
- Hold the Standby button to turn off the Speaker. The units are now disconnected.
SYNC’ING (SYNCHRONIZING) YOUR BLUETOOTH DEVICE
TO YOUR SPEAKER
Note: The speaker will connect to your Bluetooth device automatically once you have sync’d
them.
1. When you are sync’ing the devices, make sure the speaker and your Bluetooth device are
close together. When the speaker is in Power Off state, hold “Power/Stand by” button down
until the blue light comes on and blinks. Once this happens you have now begun the sync’ing
process. (NOTE: if you do not sync the devices in a reasonable amount of time, the sync’ing
process will abort and the LED light will turn off. Repeat Step 1 to start again.)
2. Make sure Bluetooth is activated on your Bluetooth device. For details about the Bluetooth
searching device function, please refer to the user manual for that specific device.
3. Pull up the list of Bluetooth devices on the device you are trying to sync and you will see
“BT2165”. If “BT2165” is not on the Bluetooth’s list, select “Scan” to search for it. Then click on
that to start the pairing process.
BATTERY CHARGING
5