English... 11
Control Pedal Input:
Plug a standard Expression pedal in
here to control the Filter Frequency remotely. Use an expres-
sion pedal, like the Roland EV-5, that terminates with a 1/4"TRS
connector.
Footswitch:
Use a standard momentary footswitch to turn
Engage on and off. Filter Queen accepts normally open momen-
tary footswitches. (In the near future an Electrix 3 button
footswitch will be available that will add extra functionality to the
Filter Queen. Stay tuned for more information….)
4 Pole Mono:
The Filter Queen operates in a Stereo 2 Pole
filter per channel mode, (unless you switch to 4 Pole mode).
When in Four Pole mode, the Filter Queen switches into Mono
operation by summing the left and right channels before the 4
pole filter. A two pole filter will give you a gentler response, in
technical terms it is defined as a 12dB/octave filter. A 4 pole or
24dB/octave filter will give you a much steeper filter response
that will sound more pronounced. 4 pole mono is especially
appropriate for effecting electric guitar and bass.
RCA Stereo Outputs
: The RCA output level is nominally
+4 dBu
1/4" Outputs
: This output produces an unbalanced +4dBu
signal.
Phono/Line Switch
: This switches the RCA inputs to
accept phono or line level.
RCA Stereo Inputs
: When the Phono/Line switch is in the
Line position, this input is optimized for a +4dBu input signal.
When the Phono/Line switch is set to Phono, the RIAA phono
pre-amp will accept a range of cartridge output levels.
1/4" Inputs:
This input is optimized for +4 dBu input signal.
Grounding Post:
Connect the ground wire from your
turntable here.
Cable Strain Relief:
The power supply cable can be
looped around this to prevent stress on the power entry jack.
U
Un
nd
de
errs
stta
an
nd
diin
ng
g
tth
he
e
F
Fiilltte
err
Q
Qu
ue
ee
en
n
•
B
Ba
ac
ck
k
P
Pa
an
ne
ell
