Page 6 of 14
INSTALLATION
Warning: Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another.
While moving the unit please note that it must always be kept upright and then placed on an
even surface.
1. Attach the fishtail connector to the end of the hose, by
extending the end of the hose and twisting the fishtail
adaptor until it is firmly attached (At least 3 full rotations)
2. Extend the opposite end of the hose and screw into the
exhaust connector (At least 3 full turns)
3. Push the Exhaust Connector onto the Exhaust outlet on the
rear of the unit
4.
Make sure the unit is upright and there are no obstructions to the
air inlets and outlet grills.
INSTALLATION OF WINDOW KIT.
The window kit (slide bar and fishtail) can be used with sliding windows and doors. For other types of
window, the fishtail should be used on its own.
1. Partially open the window and then fix
the
window kit to the window.
2. Fix the fishtail adaptor into the
opening on the slide bar
3. Fix the exhaust connector on the
opposite end of the exhaust hose to
the exhaust outlet on the rear of the
air conditioner.
