13
Clean the water tank
Every few weeks, clean the tank to prevent growth of mould, mildew and bacteria.
Partially fill the tank with clean water and add a little mild detergent. Swish it around in
than empty the tank and rinse.
NOTE: Do not use a dishwasher to clean the tank. After cleaning and drying the tank
must be reinserted securely into dehumidifier in order to restart operation
Frequently Asked Questions
Why doesn’t the dehumidifier seem to extract much water if the temperature is low?
This is a compressor dehumidifier which works best in temperatures above 15⁰C. If the
temperature is low and the air is dryer than the setting on the humidistat the unit will
not extract water. If you want to use a dehumidifier for outside buildings, unheated
properties, boats or garages please check our desiccant range.
Why doesn’t the unit work /or stops suddenly?
The water tank may be full or displaced. To rectify: empty the tank and carefully place
the tank back in the unit.
Also the unit may be running in dehumidifying mode with a low room temperature.
Please check if the room temperature is lower than 5⁰C. If so, the unit will stop working
while in dehumidifying mode (unit may be defrosting).
The ambient operating range is between 5⁰C and 32⁰C with a relative humidity ranging
from 40% to 80%. For maximum efficiency use the unit between 15⁰C and 32⁰C.
Sometimes cold and/or hot air comes out from the air outlet grill, why?
When the unit is in dehumidifying mode it absorbs humid air from room and freezes it
to reduce the humidity.
During the cold cycle there should be cold air coming out of the unit
During the hot cycle hot dry air should be coming out of the outlet grill.
Troubleshooting
Issue
Cause
Solution
Hot or cold air
being produced
Normal Operation
When the unit is in dehumidifying
mode it absorbs humid air from room
and freezes it to reduce the humidity.
During the cold cycle there should be
cold air coming out of the unit
During the defrost cycle hot dry air
should be coming out of the outlet grill.
Unit does not
operate
Is
the
plug
properly
inserted in the socket?
Insert the plug into the socket and turn
the switch on.
All manuals and user guides at all-guides.com