4
INSTALLATION AND OPERATION
1. Remove the dehumidifier and power cord from the packaging.
2. Plug the power cord into the power socket, and then connect the plug to an
appropriate mains socket.
3. Press the “On/Off” button, the indicator LED will illuminate green and the
dehumidifier will begin to operate. You should able to feel the air blowing from
the dry air outlets on both sides of the dehumidifier
4. To switch off the unit, press “On/Off” button, the indicator LED will go out and the
dehumidifier will turn off.
WATER DRAINAGE
The
water
tank
has
a
capacity of
approximately 2 litres. When the water tank
is full, the unit will switch off automatically
and the Indicator LED will illuminate orange.
To remove the water tank, first switch off the
dehumidifier by pressing the “On/Off” button
so that the indicator LED goes out. Then
remove the water tank from the unit, holding
the handle on the front of the tank, before
pouring the water in to a toilet or sink.
When the water tank has been emptied, insert
it back into the unit. To continue
dehumidifying, press the “On/Off” button so
that the LED indicator is green, and the
dehumidifier will start to operate
CARE AND MAINTENANCE
Always shut off the unit and unplug it from the mains before cleaning or performing
any maintenance. When it is not in use for long periods, it is advisable to remove the
plug from the power socket. Do not use chemical solvents (such as benzene, alcohol
or gasoline) as they may cause irreversible damage to the unit.
CLEANING THE CASING
Use a piece of soft cloth to clean the surface of the product or use a brush to wipe
the dust off the air inlet and the air outlets.
