background image

 

 

SAFETY INSTRUCTIONS                                                                                                                 

 
IMPORTANT! 

  Carefully read the instructions before operating the unit 

  This appliance comprises of an indoor and an outdoor unit. The indoor slim evaporator 

is  designed  exclusively  for  indoor  installations  while  the  external  condenser  can  be 
installed outside while still away from flood water or snow line. 

  Always place the unit on a dry and stable surface. Install the outdoor unit on a wall with 

wall-mounting  brackets  or  fix  to  a  floor  slab  with  special  floor  mounting  slab  bolts  or 
brackets away from flood or snow lines. 

  Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed power source. 

  Installation must be in accordance with the regulations of the country where the unit is 

used.  

  This appliance is intended for permanent installation into a fixed structure, and should 

not be installed on vehicles.  

  The  outdoor  part  of  the  air  conditioner  unit  must  always  be  stored  and  transported 

upright, otherwise irreparable damage may be caused to the compressor; if in doubt we 
suggest waiting at least 24 hours before starting the unit. 

  These  air  conditioners  are  supplied  with  pre  flared  refrigeration  pipes  and  electrical 

cables, which enables the installer to reduce the installation time.  

  European  Union  regulations  requires  for  an  F-Gas  trained  engineer  to  handle  any 

operation  where  non-qualified  intervention  could  cause  fluorinated  gas  to  escape.    A 
commissioning certificate must be issued with any installation. 

  This air conditioner contains R32 which is a safe efficient refrigerant which has a lower 

environmental burden than traditional refrigerants. 

  The  refrigerant  used  in  this  air  conditioner  is  an  environmentally  friendly  hydrocarbon 

R32,  which  has  a  very  low  Global  Warming  Potential  compared  to  traditional 
refrigerants. 

  R32 is classed as slightly flammable and as such naked flames and sources of ignition 

should be kept a safe distance from the unit.

  If  you  are  in  any  doubt  about  the  suitability  of  your  electrical  supply  have  it  checked 

and, if necessary, modified by a qualified electrician. 

  This air conditioner has been tested and is safe to use. However, as with any electrical 

appliance - use it with care. 

  Disconnect the power before dismantling, assembling or cleaning.  

  Never connect the unit to an electrical outlet using an extension cord. Both the indoor 

unit and outdoor must be hardwired by a qualified electrician.  

  Never  operate  this  appliance  if  the  cord  is  damaged.  Ensure  the  power  cord  is  not 

stretched or exposed to sharp objects or edges. 

  A  damaged  supply  cord  should  be  replaced  by  the  manufacturer  or  a  qualified 

electrician in order to avoid a hazard. 

  Avoid touching any moving parts within the appliance. 

  Never insert fingers, pencils or any other objects through the guard  

  This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced 

physical, sensory or mental capabilities. It is also not intended for use by those with a 
lack  of  experience  and  knowledge,  unless  they  have  been  given  supervision  or 
instruction concerning the use of the appliance by a person responsible for their safety.  
Do not leave children unsupervised with this appliance. 

Содержание iQool12












































Отзывы: