14
SUCTION
ADJUSTMENT
Press the button
on the remote control or in the app to
adjust suction levels. Only works in Automatic Cleaning Mode. In
Mopping Mode, it will adjust the water flow rate instead.
PAUSE
During operation of the robot press the start button or the pause
button
on the remote / app.
CONTROL PANEL
HOME
The home button sends the robot to the charging base where it
will start charging (Charging base must be turned on).
POWER ON /
OFF
The power on button will turn the robot on and it will start doing
automatic cleaning. When the robot is on, the button will turn the
robot off and it will stop cleaning.
CHARGING
INDICATOR
The charging indicator will show if the robot is charging or turned
on. The indicator is also used when connecting Wi-Fi (see add
device section).
WAKE UP
After three minutes of inactivity, the robot goes into sleep mode
and all indicators turn off. You can use any buttons on the robot or
app to wake it up. If it has been inactive for more than 20 minutes,
on the start and go home buttons can wake it.
SHUT DOWN
After the robot has completed its task and come to rest, press the
main power switch at the side of the robot to shut down.
Note: it is recommended that after the robot has completed its
task, it is returned to the charging base to fully recharge the
battery. It not in use for a long time, then it can be shut down.
Charging Indicator
Содержание iQLEAN-CR01
Страница 2: ...2 ...
