ElectrIQ EQODHFTBL, Руководство пользователя, Страница: 9 / 15

9
STEP 5: Attach Flame Screen (2) to the top of Support Bar-Upper (3) and fix the connection with 2pcs M5 screws
and washers (BB), (See Figure
Ⅰ
,
Ⅱ
).
Repeat this step and connect Flame Screen (2) to other 3 sets Support Bars-Upper (3). (See Figure Ⅲ , Ⅳ )
STEP 6: Place Reflector (1) on the Flame Screen (2)
and fix the connection with 4pcs M5 CAP NUT (AA).
STEP 7: Place the whole upper parts to top of tank housing assembly. Make
sure match the top ends of tank housing assembly with the bottom slot of
Support Bar – Upper (3). Match the threaded holes and fix each connection with
2pcs M5 Screws and Washers (BB)