ElectrIQ EORW800LED Скачать руководство пользователя страница 4

 

 

Never  use  the  plug  as  a  switch  to  start  and  turn  off  the  heater.  Use  the 
provided power button located on the control panel. 

 

Do not use an external timer. 

 

Do not cover the appliance, or place items close to the unit which may restrict 
airflow, as this may present a fire risk. 

 

The heater must not be located immediately below a socket outlet.  

 

Always place the unit on a dry and stable surface. Do not move or tilt the unit. 

 

Avoid keeping the unit in direct sunlight for a long period of time. 

 

The  heater  is  designed  to  be  used  at  temperatures  above  -20°C.    If  it  is 
exposed to temperatures below this, it must be allowed to warm above this 
level before operation. 

 

Do  not  attempt  to  repair,  disassemble  or  modify  the  appliance.  This  unit 
contains no user-serviceable parts.  

 

Always  unplug  or  disconnect  the  appliance  from  the  mains  power  supply 
when not in use, or when moving or cleaning it. Do not pull the cord to unplug 
the heater.  

 

Keep  the  heater  clean.  Do  not  allow  any  object  to  enter  the  ventilation  or 
exhaust  opening  as  this  may  cause  electric  shock,  fire,  or  damage  to  the 
heater.  

 

Do  not  use  the  appliance  for  anything  other  than  its  intended  use.  It  is 
designed for domestic indoor use only.  

 

There may be a trace of odour during the first few minutes of initial use, or 
after a period of storage. This is normal and will quickly disappear.  

 

This appliance has hot and arching or sparking parts inside. Do not use it in 
areas where gasoline, paint, or any flammable liquids are used or stored.  

 

This appliance is not intended for use in bathrooms, laundry areas and similar 
humid locations. Never locate this appliance where it may fall into a bathtub 
or otherwise become exposed to water.  

 

WARNING:

 To reduce the risk of fire or electrical shock, DO NOT use this 

appliance with any solid-state Speed Control Device or any variable speed 
controllers. 
 

ENERGY SAVING AND UNIT SAFETY PROTECTION TIPS 

 

Do not cover or restrict the airflow. Do not use in dusty environment. 

 

For safety and maximum performance, the minimum distance from a wall or 
objects should be 50cm.  

 

 

Содержание EORW800LED











Отзывы: