OPERATION OF THE MICROWAVE
When first powered up the microwave will enter standby mode and “-- --“ will be displayed
on the screen. Before using the controls of the microwave the door must be opened and
closed to enter Standby Mode, “0:00” will be displayed on the screen.
POWER SAVING MODE
The microwave will enter Power Saving Mode if while in standby mode the
button is
pressed, or if there is no input during the standby duration (Default: 60 Seconds). During
Power Saving Mode the buttons are disabled and the screen will be blank. To exit Power
Saving Mode open and close the microwave door to enter Standby Mode.
MANUAL OPERATION
1. With the microwave in standby press the
button, “00:00” will be displayed on
the screen.
2. Type in the cooking time required, eg for 1 minute and 25 seconds, press 1, then 2,
then 5.
3. The microwave will default to full power, to choose a different power level press the
appropriate power level button. To revert to full power press the same button again.
4. Press
to start cooking. The microwave will display the remaining cooking time.
PAUSE COOKING
The cooking operation can be paused by pressing the
button, or by opening the
microwave door*. While paused the cooking operation can be restarted by pressing the
button, or cancel by pressing the
button. This would return the microwave to
standby mode.
*The setting for door opening can be changed between pausing operation and cancelling
cooking. See the Microwave Settings section.
WHEN THE COOKING PROGRAM HAS FINISHED
By default when the cooking program completes, the microwave will give a 3 second bleep
while displaying “END”, before returning to standby mode. This can be changed so that
the microwave will continue to bleep until either the door is opened or
is pressed. See
the Microwave Settings Section for more information.
Level
High
M. High
Med.
Defrost
Hold
Power
100%
70%
50%
20%
0%
Display
PL10
PL7
PL5
PL2
PL0
9
