6
OPERATION-REMOTE CONTROL
Turn on the heater using the switch located on the top of
the heater. You can how use the remote to turn on the
heating functions.
Press the button once to turn the unit on and press again
to turn the unit off. Never turn the unit off via the mains
supply, always turn the unit off via the remote, and then
turn off from the mains supply.
INSERTING BATTERIES
On the back of your remote-control pull-out battery cover. Insert 2 AAA
Alkaline batteries (not included) into your remote control in accordance with
the instructions and polarity the batteries.
CLEANING AND MAINTENANCE
ATTENTION:
Please turn off the unit and unplug from the mains and allow to
fully cool before cleaning or performing any maintenance.
1.
If the heater has collected dust or dirt inside the unit or around the heating
element, have to unit cleaned by a qualified service agent. Do not operate
the heater in this condition.
2.
The only maintenance required is cleaning of the external surfaces of the
heater.
3.
Do not touch the heating element with bare fingers, as residue from your
hand could affect the life of the lamp. If it is accidentally touched, remove the
finger marks with a soft cloth moistened with mentholated spirit or alcohol.
4.
The heater contains no user serviceable parts. Should the product suffer
damage or breakdown, it must be returned to the manufacturer or its service
agent.
5.
Damaged supply cords to be replaced by the manufacturer, service agent or
similarly qualified person in order to avoid hazard.
