6
INSTALLATION
CAUTION
1. The ceramic hob must be installed by qualified personnel or
technicians. Please never conduct the operation by yourself.
2. The ceramic hob must not be mounted above or in close proximity
to cooling equipment, dishwashers and rotary dryers.
3. The ceramic hob must be installed in a way that ensures good
ventilation to the unit to enhance its reliability.
4. Ensure the wall, work surface and area around the hob are
suitably heat resistant.
5. To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
Cut a hole in the work surface according to the dimensions shown
below.
For the purpose of installation and use, a minimum of 5 cm space
must be preserved around the hole. Be sure the thickness of the
work surface is at least 30mm. Please select a heat-resistant work
surface material to avoid larger deformation caused by heat
radiation from the hob, as shown below:
Ensure the ceramic hob is kept in a good condition, is well ventilated
and the air inlet and outlet are not blocked, as shown on the
following page:
L(mm)
W(mm)
H(mm)
D(mm)
A(mm)
B(mm)
X(mm)
eiQC77-V3
770
520
50
46
740
490
50 min
