9
INSTALLATION
•
Draw a vertical line up to the ceiling or up to the upper limit, at the centre of the area in
which the hood is to be fitted.
•
A horizontal line
A
at
790
– 890
mm above the cooker top.
•
A horizontal line
B
at a
X
mm above the horizontal line
A
.
•
A horizontal line
C
at a 115mm below the horizontal line
A.
•
Mark a point
(1)
on the horizontal line
A
,
80
mm to the vertical reference line.
•
Repeat this operation on the other side, checking that the two marks are levelled.
•
Mark a point
(2)
on the horizontal line
B
,
60
mm to the vertical reference line.
•
Repeat this operation on the other side, checking that the two marks are on the same
horizontal line.
•
Mark a point
(3)
on the horizontal line
C
,
150
mm to the vertical reference line. Repeat this
operation on the other side, checking that the two marks are levelled.
FIX THE BRACKETS
•
Drill holes at the marked points with a
ɸ10 mm drill bit.
•
Insert the Wall Plugs 11 into the holes.
•
Fix a Chimney fixing bracket
21
with 2 screws
10
(5 x 50) at the
horizontal line B.
Screw 2 screws
10
(5 x 50) to Wall Plugs
11
at the
horizontal line
A
; approximately the four fifth length of the screws
10
(5 x 50) was screwed into the Wall Plugs
11,
used for hook the
hood.
LOWER DECORATIVE CHIMNEY
•
Fix the exhaust pipe on the hood body, connect chimney and hood body with 2 screws
12
.
connect chimney fixing bracket and chimney with 2 screws
12
.
Содержание eiQ60PBSLIMEN
Страница 5: ...5 PRODUCT OVERVIEW...
