E7
Charging time
safety warning
The robot will stop charging after 5 hours. If there is a fault “!” light, “||||” battery light and
fault code “E7” will flash beeping 3 times. Pull the charging jack off than long press “
ON
”
button, the machine will be switching off and clear the fault state. Leave off for minimum 60
minutes than restart.
If fault is still present after restarting the robot contact the service centre.
E8
Over current
protection
When the robot is operating and discharging or charging and if current is higher than 3 A for
more than 3 seconds, the robot will stop charging / discharging fault “!” light, “||||” battery
light and fault code “E8” will flash beeping 3 times. Pull the charging jack off if connected than
long press “
ON
” button, the machine will be switching off and clear the fault state. Leave off
for minimum 60 minutes than restart.
If fault is still present after restarting the robot contact the service centre.
E9
Robot is jammed
The robot will stop working if it is jammed. “!” light fault code“E9” will flash, voice prompt
"
E
rror occurred. Clean or unblock" will be played.
Long press “
ON
” button, the machine will be switching off and clear the fault state. Leave off
for minimum 60 minutes than restart.
If fault is still present after restarting the robot contact the service centre
EA
Machine picking up
When the robot is picked up from ground
“
！
”light and fault code “EA” will flash will beeping three times;
a)
the machine will continue to work placed back to ground within 30 seconds
b)
after 30 seconds you need to short press “ON” button to clear the fault status
EB
Fault in side brushes
The robot will stop working if there are faults in the side brushes. “!” light and fault code “
EB
”
will flash and the voice prompt "
E
rror occurred. Clean or unblock" will be played. Clean the
side brushes, remove the debris than short press the “ON”. This should clear the fault status.
EC
Fault in left side
wheel
The robot will stop working when left side wheel is blocked. “!” light and fault code “
EC
” will
flash and the voice prompt
"
E
rror occurred. Clean or unblock"
will be played. Clean the wheel
or remove the debris than short press the “
ON
”. This should clear the fault status.
ED
Fault in right side
wheel
The robot will stop working when right side wheel is blocked. “!” light and fault code “
ED
” will
flash and the voice prompt
"
E
rror occurred. Clean or unblock"
will be played. Clean the wheel
or remove the debris than short press the “
ON
”. This should clear the fault status.
Disposal
: Do not dispose this product as unsorted waste. Collection of such waste
must be handled separately as special treatment is necessary.
Recycling facilities are now available for all customers at which you can deposit your
old electrical products. Customers will be able to take any old electrical equipment
to participating civic amenity sites run by their local councils. Please remember that this
equipment will be further handled during the recycling process, so please be considerate
when depositing your equipment. Please contact the local council for details of your local
household waste recycling centres.