ElectrIQ eiQ-3MS9K9K9K, Руководство пользователя и инструкция по установке, Страница: 9 / 24

9
INSTALATION GUIDE
SAFETY

Only qualified personnel should install this appliance.

This installation manual is intended for use by individuals possessing adequate
backgrounds and qualifications in electrical, electronic, refrigerant and mechanical fields.

Any attempt to install or repair the appliance may result in personal injury and/or property
damage.

The manufacturer and retailer cannot be held responsible for the interpretation of this
information, nor can it assume any liability in connection with its use.

The units are designed for permanent installation.

The equipment is designed for domestic or office use and we are not making any
endorsements for its use in industrial or maritime environments.

Do not place near sources of heat, vapours, industrial machine oil or other flammable
gases.

High frequency waves generated by radio equipment, welders and medical equipment will
interfere with the normal operation of the unit.

Install this device only when it complies with local/national legislation, ordinances and
standards. Check the mains voltage and frequency. This unit is only suitable for an earthed
electrical supply, connection voltage 230 V~ / 50 Hz.

The information, specifications and parameter are subject to change due to technical
modifications or improvement without any prior notice. The accurate specifications are
presented on the nameplate label.

Please read this installation manual completely before installing the product.

When the power cord is damaged, replacement work shall be performed by authorized
personnel only.

Installation work must be performed in accordance with all European, national and / or
local directives and standards and must be done by authorized personnel only.

Always make sure to wear the correct personal safety protections such as protective
eyewear, gloves, ear protection etc.

This air conditioner contains a refrigerant and can be classified as pressurized equipment.
Therefore always contact a qualified air conditioning engineer for installation and
maintenance of the air conditioner. The air conditioner must be inspected and serviced on
an annual basis by a qualified air conditioning engineer.

For your convenience you can download the latest version of the user / installation manual
from www.electriq.co.uk
INDOOR UNIT POSITION

The air inlet and outlet vents should be away from any obstruction, ensuring that there is a
good airflow through the whole air-conditioned space.

Select a position where the condensing water can be easily drained out, and the indoor unit
can be easily connected to outdoor unit.

The wall where the unit is fixed should be strong enough to withstand the full weight and
vibration of the unit.

The unit should be accessible for service and maintenance.

The height of the installed unit should be ideally more than 200cm from floor.

The air conditioner must not be installed in a wet environment such as a bathroom, shower
or swimming pool etc.