Page
7
of
13
OPERATION AND SETTINGS
This portable air conditioner features three functions: cooling, heating and fan. Also the unit will
reduce the humidity in the room by extracting water in cooling or heating mode.
The fan has two speeds: high and low
1.
Control instruction
：
：
：
：
Control panel
：
：
：
：
Make sure the knob is in off position before plugging the unit on.
Starting the unit
1. Turn the control knob to the “OFF” position.
2. Plug the unit into an appropriate power supply.
3. Turn the control knob to “COOL/HEAT”, the cooling/ heating light is on while the unit is in operation.
Turning off the unit
Turn the control knob to the “OFF” position and the unit will stop operating.
FAN MODE
Low Fan Speed:
Turn the control knob to the “
” position, the unit operates at low fan
speed
.
High Fan Speed:
Turn the control switch to the “
” position, the unit operates at high fan
speed
.
Compressor will not start in fan mode, unit will just move the air around the room.
Cooling/ Heating mode
HIGH Cooling/ Heating:
Turn the knob to the
position, high cooling/ heating mode is activated.
LOW Colling/ Heating:
Turn the knob to
position, low cooling/ heating mode is activated.
The compressor will be active on in this mode.
To use the unit in heat mode please ensure that is installed as in figure C2, page 5 with unit expelling cold
air via the exhaust hose and hot air from the front vent back into the room.
FULL:
When the internal water tank is full, the full light will be on.