Electrify America Level 2, Руководство по эксплуатации

Страница: 18 / 20

NOTES
18
Notes
The charger must always be used in
conjunction with the Dock.
Electric vehicle charger characteristics
(IEC 61851-1 Ed 3):
1. The product must be connected to an
AC supply power.
2. The product is Dock-compatible. It is
available with a Type-1 plug with connected
cable.
3. This product is designed for use with
Level 2-compatible electric vehicles.
4. The product can be installed and used
in indoor and outdoor areas. For best
performance, shield product from
direct sunlight. To ensure adequate heat
dissipation and proper functioning of the
device, place the dock at a generous
distance from surrounding objects. We
recommend 20", depending on ambient
temperature.
5. The Dock and charger together are rated
electrical protection class IP I. The open
dock (i.e., without the charger) is rated
electrical protection class IP I.
Disposal
The Dock and the charger are electrical
devices. Follow all federal, provincial and
local laws, regulations, ordinances and
safety standards regarding disposal of this
device.
Cleaning
The charger may only be cleaned with water;
the use of lukewarm water is recommended.
Do not use cleaning agents containing solvents.
Dismounting
You must disconnect the main power supply
before dismounting the charger.
Only a
qualified electrician should dismount the
Dock if it is hardwired to the main power
supply.
After power has been disconnected,
loosen the two set screws on the side. Take
the charger out of the Dock by pulling down
the locking bracket, taking out the charging
unit, and, if fitted, detaching the Ethernet
cable connecting the charger and the Dock.
DANGER
The Dock must be
disconnected from
the power supply
before dismounting.
Make sure that all
components are dry
during dismounting.
CAUTION
When dismounting
the charger, make
sure that the charger
is carefully removed
from the Dock so
that the flat ribbon
data cables, the
Dock and the charger
are not damaged
during dismounting.